About the system:
The main post consists of a special pipe welded to a U-shaped rail that serves as connection to the amphibian guiding device (abbr.: ALE). The additional welded U-profile is bolted to the C-post of the amphibian guiding device. The lateral bracings of the main and corner posts serve as an additional contribution to the stability of the system. The wire mesh is fixed to the main post and to the overhang of the guiding device with special holders. The self-closing door is mounted on the guiding device. In addition, welded rectangular tubes that are poured in concrete foundations at a depth of approximately 0.70 m, provide the necessary stability.
Benefits that count:- between later mowing edge and wire mesh is a distance of at least 70 mm, so that maintenance is possible
without damaging the braid or the mower - due to the stability of the system, destroying or overcoming the fence is impossible for red deer or roe deer
- it is not possible for small animals to dig through the amphibian guiding device, since the system is backfilled
- the space-saving design is cost effective (no extra land required)
|
